National salary · May 2025

Rotary Drill Operator salary

Typical U.S. pay is $67,890 a year, about $33 an hour.

Most workers (the middle 80%) earn between $47,010 and $101,860.

Above most U.S. jobs Pays more than jobs held by 67% of U.S. workers.

At a glance

Typical annual pay
$67,890
Full pay range ↓
People in this occupation
12,600
Compare careers ↓
Projected 10-year growth
+0.8%
Explore outlook ↓
AI task exposure
Low · 4/100
See limitations ↓

Pay range

10%
$47,010
25%
$53,810
Median
$67,890
75%
$81,360
90%
$101,860
Percent of workers earning less. The darker band is the middle half of workers (25th to 75th percentile).
People in this job
12,600
Career field
Construction and extraction
Official category
Rotary Drill Operators, Oil and Gas SOC 47-5012

AVGPAY FORWARD VIEW

What could rotary drill operator pay in the future?

Latest observed U.S. median: $67,900 in May 2025. This estimates an occupation's published median wage, independently of an individual's promotions, experience or future earnings.

Years after the latest observed wage
2026 · Experimental national forecast$69,700

Plausible range: $66,800–$72,700

AvgPay estimates this occupation could pay approximately $69,700 in 2026 nationally.

Nominal change
2.6%
In 2025 purchasing power
$67,900
Inflation-adjusted change
-0.0%

The inflation-persistence baseline performed best in development testing. We carry the latest completed annual inflation rate forward.

The model starts at the wage reference year, so one year ahead may be a nowcast of a period awaiting publication. Salary data arrive with a reporting lag. Future buying power assumes 2.63% annual inflation; this assumption is not an inflation forecast.

Explore different growth assumptions

Editing the assumption turns the result into a scenario and removes the calibrated forecast range.

How well did the forecast perform?

Development and range calibration used the release for 2024; the next release, 2025, was held out. Across 808 occupations, mean absolute percentage error was 2.68% and the intended 80% range contained 81.2% of outcomes. Each occupation counts equally.

These are pooled results from one held-out calendar release, not an accuracy claim for this particular career. Estimates share overlapping survey samples. More validation years are needed; the range is not a guarantee.

Full model, baselines and validation →

From 2022 to 2025, the published national median changed by +11.7% after inflation. This compares published estimates, not individual raises; the survey uses overlapping three-year panels.

Job demand: a separate, published projection

The Bureau of Labor Statistics projects growth of 0.8% for 2025–2035. Employment growth is shown for context and does not mechanically increase the wage estimate.

2025 employment
12,700
2035 projected positions
12,900
Typical annual openings
1,100

Openings include replacement needs; they are not current vacancies or net job growth.

Values are rounded to the nearest $100. Forecasts, scenarios and observed wages remain separate. Methods, source dates and uncertainty.

LIFE ON THE JOB

Does the working environment fit you?

Pay is one part of the choice. These occupational survey ratings describe how people typically work. Employers, settings and specialties can differ.

Contact With Others

4.4 of 5
1 · No contact with others5 · Constant contact with others

Updated 12/2005 · 27 survey responses

Freedom to Make Decisions

4.2 of 5
1 · No freedom5 · A lot of freedom

Updated 12/2005 · 26 survey responses

Indoors, Environmentally Controlled

1.1 of 5
1 · Never5 · Every day

Updated 12/2005 · 27 survey responses

Physical Proximity

4.2 of 5
1 · I don't work near other people (beyond 100 ft.)5 · Very close (near touching)

Updated 12/2005 · 25 survey responses

Public Speaking

2.5 of 5
1 · Never5 · Every day

Updated 12/2005 · 27 survey responses

Spend Time Sitting

1.8 of 5
1 · Never5 · Continually or almost continually

Updated 12/2005 · 27 survey responses

Spend Time Standing

4.4 of 5
1 · Never5 · Continually or almost continually

Updated 12/2005 · 27 survey responses

Time Pressure

4.1 of 5
1 · Never5 · Every day

Updated 12/2005 · 26 survey responses

These are mean ratings, not percentages or a personal fit score. Each question has its own response labels; suppressed results are omitted. Use the ratings to prepare questions about a specific role.

Compare career directions → · Methods and definitions →

The bigger picture for rotary drill operator

Pay is the starting point. These findings connect the salary with the actual work, career options, and what we can—and cannot—tell from the evidence.

01 / THE PAY QUESTION

Is the pay competitive in its field?

The national median is $67,890, ranking this occupation #12 of 60 within construction and extraction. That's 14% above AvgPay's employment-weighted benchmark of occupational medians.

The published middle-half range is $53,810–$81,360 (51% from its lower to upper end). Those are wages of different workers, not raises over time.

Understand the pay comparison →
02 / THE CAREER QUESTION

What would you actually build skills in?

Published occupational research identifies 14 task statements for this work. Some of the more important skills include Critical Thinking, Operation and Control, Operations Monitoring.

AvgPay finds Mechanical and Mathematics unusually prominent versus other profiled occupations.

Explore the work and skills →
03 / THE NEXT-MOVE QUESTION

What are the opportunities and tradeoffs?

For 2025–2035, published projections show +0.8% employment change and around 1,100 annual openings including replacements. These are national projections, not current vacancies.

Drywall Taper pays a higher $68,270 median within the same broad field. Qualifications may differ; this is not a promotion route.

Examine related roles and transferable skills →

AI and change: Low modeled task exposure (4/100), from 2023 research. It is not the probability of losing this job. Understand the model →

How to use this: Compare actual requirements, check wages in your location where available, and use the research below to evaluate tradeoffs. How AvgPay reaches its conclusions →

ORIGINAL AVGPAY RESEARCH

AvgPay Pay Position

Published wages answer what the job pays. These comparisons help explain where that pay sits among other careers and how much individual salaries differ.

Pay rank in this field#12 of 60

Ranks published occupation medians within construction and extraction, not employees or vacancies.

Versus field pay benchmark+14%

This occupation's $67,890 median is 14% higher than the $59,772 employment-weighted index of occupation medians in its field.

Published wage spread117%

The 90th-percentile wage is 117% above the 10th-percentile wage across different workers.

What the numbers mean

Rotary Drill Operator is #12 out of 60 in its occupational field by national median pay. Its median exceeds the field benchmark, but that does not make every position higher-paying. These comparisons can narrow your research, but do not predict your personal pay.

The difference between the published 10th and 90th percentiles ranks #31 out of 60 field occupations with complete wage data by relative range width. A wide range can signal varied wages across workers; it does not establish a promotion ladder, cause or salary trajectory.

What pays more in the same field?

These verified occupation medians are higher. They are options to investigate, not guaranteed next steps; qualifications and duties may differ substantially.

See all construction and extraction careers → · Compare career tradeoffs →

AvgPay's calculations use published occupation medians and employment, not a separate employer wage survey. Comparisons use occupations rather than individual salaries, and are not adjusted for differences in credentials, city or hours. How we calculate our research.

THE WORK

What does this job actually involve?

Set up or operate a variety of drills to remove underground oil and gas, or remove core samples for testing during oil and gas exploration.

What you would spend your time doing

  1. Train crews, and introduce procedures to make drill work more safe and effective.
  2. Observe pressure gauge and move throttles and levers to control the speed of rotary tables, and to regulate pressure of tools at bottoms of boreholes.
  3. Count sections of drill rod to determine depths of boreholes.
  4. Push levers and brake pedals to control gasoline, diesel, electric, or steam draw works that lower and raise drill pipes and casings in and out of wells.
  5. Connect sections of drill pipe, using hand tools and powered wrenches and tongs.
Show 9 more tasks
  1. Maintain records of footage drilled, location and nature of strata penetrated, materials and tools used, services rendered, and time required.
  2. Maintain and adjust machinery to ensure proper performance.
  3. Start and examine operation of slush pumps to ensure circulation and consistency of drilling fluid or mud in well.
  4. Locate and recover lost or broken bits, casings, and drill pipes from wells, using special tools.
  5. Weigh clay, and mix with water and chemicals to make drilling mud.
  6. Direct rig crews in drilling and other activities, such as setting up rigs and completing or servicing wells.
  7. Monitor progress of drilling operations, and select and change drill bits according to the nature of strata, using hand tools.
  8. Repair or replace defective parts of machinery, such as rotary drill rigs, water trucks, air compressors, and pumps, using hand tools.
  9. Clean and oil pulleys, blocks, and cables.

Skills that matter most

These published occupational ratings describe relative skill importance on a 1–5 scale.

Other names for this job (18)
Daylight DrillerDrill OperatorDrillerMotor ManOil Rig DrillerOil Well DrillerRelief DrillerRig OperatorRotary Drill OperatorRotary DrillerBlast DrillerCable DrillerCable Tool DrillerClean Out DrillerCore Drill OperatorCore DrillerDirectional Drill OperatorDirectional Driller

OUTLOOK · 2025–2035

What does the career outlook look like?

BLS projects growth of 0.8% over ten years. Openings also come from people retiring or leaving, so a job can hire even when it shrinks.

Projected employment change+0.8%2025 to 2035, BLS projection
Estimated annual openings1,100Average per year, including replacing people who leave
Projected net employment change+100Change in the number of people in this job

Projected occupational employment

2025: 12,700 workers2035: 12,900 workers

About 87 openings a year for every 1,000 people in this job.

Typical BLS entry preparation

Education for entryNo formal educational credential
Experience in a related jobLess than 5 years
On-the-job trainingModerate-term on-the-job training

Typical entry level, not a licensing rule.

Source: Table 1.2, Occupational projections and worker characteristics, 2025–35. Projections, not guarantees.

AI risk and task exposure

Low exposure 4 out of 100. Few tasks met the study’s hypothetical AI speedup criteria.

2023 research-based estimate, not a 2026 job-loss probability. This model compares potential task speedups, not observed automation in this occupation.

U.S. average: 33Construction average: 11
With a chatbot alone
3% of tasks
With AI software built on top
5% of tasks

Higher than the jobs of 6% of U.S. workers. It measures how much of the work AI could do at least twice as fast, not the odds of losing the job.

Put the exposure estimate in context

Career research identifies these important tasks for rotary drill operator. They have not been individually tested for automation by AvgPay; use them to investigate how the work may change:

  • Train crews, and introduce procedures to make drill work more safe and effective.
  • Observe pressure gauge and move throttles and levers to control the speed of rotary tables, and to regulate pressure of tools at bottoms of boreholes.
  • Count sections of drill rod to determine depths of boreholes.

BLS projects +0.8% employment change for this occupation over its projection period. That outlook is independent of the AI exposure score.

Explore training and career paths → · Review key skills →

NEXT MOVES

How could your career develop from here?

How people get in, what to build and where the work can lead. Pay differences compare typical pay in each job, not a promised raise.

01

Get into the field

Understand the preparation employers commonly expect before choosing a program or making a move.

Typical education
No formal educational credential
Related experience
Less than 5 years
On-the-job training
Moderate-term on-the-job training
See education and technology details →
02

Build the right experience

Focus on the work this occupation actually involves, and investigate transferable skills.

  • Train crews, and introduce procedures to make drill work more safe and effective.
  • Observe pressure gauge and move throttles and levers to control the speed of rotary tables, and to regulate pressure of tools at bottoms of boreholes.
  • Count sections of drill rod to determine depths of boreholes.
03

Explore the next move

Compare adjacent occupations, their pay, preparation differences and knowledge areas that may need strengthening.

6covered careers to investigate
See possible directions →

Possible moves from rotary drill operator

These are career exploration options, not verified promotions. A higher salary is the median for a different group of workers—not a raise you will necessarily receive.

AvgPay combines related-occupation evidence, published job requirements and cross-sectional wage statistics. Career stages are a planning framework, not a measured sequence of promotions; relationships based only on shared knowledge are explicitly labeled. Roles that require professional licensing may need additional qualifications. See how paths are constructed.

CONNECTED CAREER INTELLIGENCE

Where could your skills connect?

Career relationships work differently from salary comparisons. We separate documented occupation relationships from AvgPay's computed skill and knowledge matches, and show why each connection appears.

Documented related occupations

Source-published occupational relationships; not measured career moves

  • Well Driller →Published relationship

    These occupations have a documented research relationship. This is not evidence of a common career transition.

    Shared: Operation and Control · Operations Monitoring · Mechanical

    Different occupational emphasis: Design, Equipment Selection. This is not an assessment of your skills.

  • Extraction Helper →Published relationship

    These occupations have a documented research relationship. This is not evidence of a common career transition.

    Shared: Mechanical · Operations Monitoring · Monitoring

    Different occupational emphasis: Repairing, Troubleshooting. This is not an assessment of your skills.

  • Oilfield Service Operator →Published relationship

    These occupations have a documented research relationship. This is not evidence of a common career transition.

    Shared: Mechanical · Mathematics · Critical Thinking

    Different occupational emphasis: Customer and Personal Service, Troubleshooting. This is not an assessment of your skills.

Comparable skill profiles

AvgPay-calculated overlap of published skill and knowledge ratings; modeled, not observed

  • 58% weighted overlap of published skills and knowledge; not a transfer probability.

    Shared: Operation and Control · Operations Monitoring · Coordination

    Different occupational emphasis: Public Safety and Security, Building and Construction. This is not an assessment of your skills.

  • Quarry Worker →AvgPay similarity

    57% weighted overlap of published skills and knowledge; not a transfer probability.

    Shared: Operation and Control · Operations Monitoring · Active Listening

    Different occupational emphasis: Time Management, Customer and Personal Service. This is not an assessment of your skills.

  • Sheet Metal Worker →AvgPay similarity

    56% weighted overlap of published skills and knowledge; not a transfer probability.

    Shared: Mechanical · Mathematics · Coordination

    Different occupational emphasis: Building and Construction, Design. This is not an assessment of your skills.

Different occupation names may share one government wage category; none of these comparisons demonstrates licensing eligibility, employer demand or a guaranteed progression. Read the matching rules →

Explore the connected career network →

These are occupations in the same broad career field, not promised promotions or verified career transitions. Compare duties, required credentials and job demand before deciding where to go next.

Deeper research — expandedSkills, training, pay distribution and inflation, using the evidence available for this occupation

Beyond the salary headline

Explore occupational requirements, knowledge advantages and the implications of the published pay range. When detailed projections or salary trends are unavailable, we make that clear instead of inventing them.

Knowledge advantages → · Education and tools → · Purchasing power → · Research methods →

Understanding your salary options

The national median of $67,890 reflects wages for the full official BLS occupation category. It does not separate experience, specialty, certifications, shift patterns, local living costs or benefits.

Published 90th-percentile wages are 50% above the median. Use the pay percentile tool to compare a real salary with the published distribution rather than assuming an advertised salary fits a typical worker.

We currently have 60 wage-covered occupations within construction and extraction, and 825 national occupations overall. Compare the field →

WHAT SETS IT APART

What makes this job different?

Knowledge this career emphasizes more than other occupations with comparable published ratings—an AvgPay calculation.

This jobTypical profiled career
Mechanical →+0.83 points above the typical profiled career
Mathematics →+0.73 points above the typical profiled career
Personnel and Human Resources →+0.68 points above the typical profiled career
Transportation →+0.40 points above the typical profiled career
Administration and Management →+0.35 points above the typical profiled career

Abilities rated important for this occupation

Control Precision4.0 of 5
Problem Sensitivity4.0 of 5
Near Vision3.9 of 5
Arm-Hand Steadiness3.8 of 5
Manual Dexterity3.8 of 5
Multilimb Coordination3.8 of 5
Information Ordering3.6 of 5
Oral Comprehension3.6 of 5

These are published occupation-level ratings, not a personal aptitude test or hiring screen.

Broader activities this job emphasizes

Inspecting Equipment, Structures, or Materials4.6 of 5
Controlling Machines and Processes4.5 of 5
Handling and Moving Objects4.3 of 5
Performing General Physical Activities4.2 of 5
Identifying Objects, Actions, and Events4.2 of 5
Communicating with Supervisors, Peers, or Subordinates4.2 of 5
Getting Information4.2 of 5

Ratings run from 1 to 5, reflecting importance rather than time spent or personal proficiency.

EDUCATION, TRAINING & TECHNOLOGY

How do people prepare for this work?

Typical preparationSome preparation

Preparation level 2 of 5

A broad guide to the education and experience most people have. It is not a license requirement.

Education reported for the occupation

Less than a High School Diploma31%
High School Diploma or the equivalent (such as a GED)29%
Some College Courses22%
Post-Secondary Certificate9%
Bachelor's Degree9%

Technology and software examples

Microsoft ExcelMicrosoft Office softwareMicrosoft WordPythonSAP softwareSalesforce softwareCAPSHER Technology SureTecDrillingsoftware DrillProDrillingsoftware Tubular DatabasePason WellView Field SolutionSchlumberger Petrel E&PStructure query language SQL

What does inflation mean for this paycheck?

Use the published annual CPI observations to compare purchasing power over time. This calculator is not a historical wage trend for this occupation.

Pay needed in 2025 to break even$71,731
Prices rose5.7%
Purchasing power lost if pay stayed flat$3,636

AvgPay purchasing-power calculator using annual U.S. CPI averages. The starting pay is an editable example, not a historical salary observation for Rotary Drill Operator. This does not account for regional prices or taxes.

Next steps

Sources, definitions and methodology

AvgPay calculates original salary and career comparisons from licensed and publicly available occupational records. See our source inventory, formulas, data limitations and release dates.

Wages: Bureau of Labor Statistics Occupational Employment and Wage Statistics, May 2025. Published wage estimates describe the full statistical occupation, not an individual offer, job seniority or narrow specialty. Occupational projections, when available, are separate estimates.

Duties, skills and occupation links: This page includes information from the O*NET® 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under CC BY 4.0. AvgPay has modified and combined some of this information with other source data and our own calculations. O*NET® is a USDOL/ETA trademark. USDOL/ETA has not approved, endorsed or tested these modifications.

Regional buying power: relative price levels are from the Bureau of Economic Analysis regional price parities; wage and price years are shown alongside each comparison. Future wages and ranges are AvgPay model outputs, separate from observed statistics. Working-condition ratings are from the same licensed O*NET database described above.

Career similarity is a research comparison, not an observed transition. AI task exposure comes from historical research rather than a live layoff or automation dataset.