National salary · May 2025

Lathe Operator salary

Typical U.S. pay is $50,620 a year, about $24 an hour.

Most workers (the middle 80%) earn between $36,670 and $69,700.

Around the middle of U.S. jobs Pays more than jobs held by 51% of U.S. workers.

At a glance

Typical annual pay
$50,620
Full pay range ↓
People in this occupation
16,710
Compare careers ↓
Projected 10-year growth
-11.3%
Explore outlook ↓
AI task exposure
Low · 10/100
See limitations ↓

Pay range

10%
$36,670
25%
$43,250
Median
$50,620
75%
$60,700
90%
$69,700
Percent of workers earning less. The darker band is the middle half of workers (25th to 75th percentile).
People in this job
16,710
Career field
Production
Official category
Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic SOC 51-4034

AVGPAY FORWARD VIEW

What could lathe operator pay in the future?

Latest observed U.S. median: $50,600 in May 2025. This estimates an occupation's published median wage, independently of an individual's promotions, experience or future earnings.

Years after the latest observed wage
2026 · Experimental national forecast$52,000

Plausible range: $49,800–$54,200

AvgPay estimates this occupation could pay approximately $52,000 in 2026 nationally.

Nominal change
2.6%
In 2025 purchasing power
$50,600
Inflation-adjusted change
0.0%

The inflation-persistence baseline performed best in development testing. We carry the latest completed annual inflation rate forward.

The model starts at the wage reference year, so one year ahead may be a nowcast of a period awaiting publication. Salary data arrive with a reporting lag. Future buying power assumes 2.63% annual inflation; this assumption is not an inflation forecast.

Explore different growth assumptions

Editing the assumption turns the result into a scenario and removes the calibrated forecast range.

How well did the forecast perform?

Development and range calibration used the release for 2024; the next release, 2025, was held out. Across 808 occupations, mean absolute percentage error was 2.68% and the intended 80% range contained 81.2% of outcomes. Each occupation counts equally.

These are pooled results from one held-out calendar release, not an accuracy claim for this particular career. Estimates share overlapping survey samples. More validation years are needed; the range is not a guarantee.

Full model, baselines and validation →

From 2022 to 2025, the published national median changed by -2.1% after inflation. This compares published estimates, not individual raises; the survey uses overlapping three-year panels.

Job demand: a separate, published projection

The Bureau of Labor Statistics projects decline of 11.3% for 2025–2035. Employment growth is shown for context and does not mechanically increase the wage estimate.

2025 employment
16,700
2035 projected positions
14,800
Typical annual openings
1,400

Openings include replacement needs; they are not current vacancies or net job growth.

Values are rounded to the nearest $100. Forecasts, scenarios and observed wages remain separate. Methods, source dates and uncertainty.

LIFE ON THE JOB

Does the working environment fit you?

Pay is one part of the choice. These occupational survey ratings describe how people typically work. Employers, settings and specialties can differ.

Contact With Others

3.4 of 5
1 · No contact with others5 · Constant contact with others

Updated 08/2024 · 25 survey responses

Freedom to Make Decisions

2.9 of 5
1 · No freedom5 · A lot of freedom

Updated 08/2024 · 25 survey responses

Indoors, Environmentally Controlled

4.2 of 5
1 · Never5 · Every day

Updated 08/2024 · 23 survey responses

Physical Proximity

2.4 of 5
1 · I don't work near other people (beyond 100 ft.)5 · Very close (near touching)

Updated 08/2024 · 24 survey responses

Public Speaking

2.4 of 5
1 · Never5 · Every day

Updated 08/2024 · 25 survey responses

Spend Time Sitting

1.7 of 5
1 · Never5 · Continually or almost continually

Updated 08/2024 · 25 survey responses

Spend Time Standing

4.1 of 5
1 · Never5 · Continually or almost continually

Updated 08/2024 · 25 survey responses

Time Pressure

3.3 of 5
1 · Never5 · Every day

Updated 08/2024 · 25 survey responses

These are mean ratings, not percentages or a personal fit score. Each question has its own response labels; suppressed results are omitted. Use the ratings to prepare questions about a specific role.

Compare career directions → · Methods and definitions →

The bigger picture for lathe operator

Pay is the starting point. These findings connect the salary with the actual work, career options, and what we can—and cannot—tell from the evidence.

01 / THE PAY QUESTION

Is the pay competitive in its field?

The national median is $50,620, ranking this occupation #33 of 105 within production. That's 3% above AvgPay's employment-weighted benchmark of occupational medians.

The published middle-half range is $43,250–$60,700 (40% from its lower to upper end). Those are wages of different workers, not raises over time.

Understand the pay comparison →
02 / THE CAREER QUESTION

What would you actually build skills in?

Published occupational research identifies 14 task statements for this work. Some of the more important skills include Operations Monitoring, Operation and Control, Active Listening.

AvgPay finds Production and Processing and Engineering and Technology unusually prominent versus other profiled occupations.

Explore the work and skills →
03 / THE NEXT-MOVE QUESTION

What are the opportunities and tradeoffs?

For 2025–2035, published projections show -11.3% employment change and around 1,400 annual openings including replacements. These are national projections, not current vacancies.

CNC Operator pays a higher $50,690 median within the same broad field. Qualifications may differ; this is not a promotion route.

Examine related roles and transferable skills →

AI and change: Low modeled task exposure (10/100), from 2023 research. It is not the probability of losing this job. Understand the model →

How to use this: Compare actual requirements, check wages in your location where available, and use the research below to evaluate tradeoffs. How AvgPay reaches its conclusions →

ORIGINAL AVGPAY RESEARCH

AvgPay Pay Position

Published wages answer what the job pays. These comparisons help explain where that pay sits among other careers and how much individual salaries differ.

Pay rank in this field#33 of 105

Ranks published occupation medians within production, not employees or vacancies.

Versus field pay benchmark+3%

This occupation's $50,620 median is 3% higher than the $49,322 employment-weighted index of occupation medians in its field.

Published wage spread90%

The 90th-percentile wage is 90% above the 10th-percentile wage across different workers.

What the numbers mean

Lathe Operator is #33 out of 105 in its occupational field by national median pay. Its median exceeds the field benchmark, but that does not make every position higher-paying. These comparisons can narrow your research, but do not predict your personal pay.

The difference between the published 10th and 90th percentiles ranks #49 out of 105 field occupations with complete wage data by relative range width. A wide range can signal varied wages across workers; it does not establish a promotion ladder, cause or salary trajectory.

What pays more in the same field?

These verified occupation medians are higher. They are options to investigate, not guaranteed next steps; qualifications and duties may differ substantially.

See all production careers → · Compare career tradeoffs →

AvgPay's calculations use published occupation medians and employment, not a separate employer wage survey. Comparisons use occupations rather than individual salaries, and are not adjusted for differences in credentials, city or hours. How we calculate our research.

THE WORK

What does this job actually involve?

Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar stock.

What you would spend your time doing

  1. Inspect sample workpieces to verify conformance with specifications, using instruments such as gauges, micrometers, and dial indicators.
  2. Study blueprints, layouts or charts, and job orders for information on specifications and tooling instructions, and to determine material requirements and operational sequences.
  3. Adjust machine controls and change tool settings to keep dimensions within specified tolerances.
  4. Move controls to set cutting speeds and depths and feed rates, and to position tools in relation to workpieces.
  5. Start lathe or turning machines and observe operations to ensure that specifications are met.
Show 9 more tasks
  1. Select cutting tools and tooling instructions, according to written specifications or knowledge of metal properties and shop mathematics.
  2. Crank machines through cycles, stopping to adjust tool positions and machine controls to ensure specified timing, clearances, and tolerances.
  3. Lift metal stock or workpieces manually or using hoists, and position and secure them in machines, using fasteners and hand tools.
  4. Replace worn tools, and sharpen dull cutting tools and dies, using bench grinders or cutter-grinding machines.
  5. Position, secure, and align cutting tools in toolholders on machines, using hand tools, and verify their positions with measuring instruments.
  6. Compute unspecified dimensions and machine settings, using knowledge of metal properties and shop mathematics.
  7. Install holding fixtures, cams, gears, and stops to control stock and tool movement, using hand tools, power tools, and measuring instruments.
  8. Move toolholders manually or by turning handwheels, or engage automatic feeding mechanisms to feed tools to and along workpieces.
  9. Turn valve handles to direct the flow of coolant onto work areas or to coat disks with spinning compounds.

Skills that matter most

These published occupational ratings describe relative skill importance on a 1–5 scale.

Other names for this job (18)
CNC Lathe Operator (Computer Numerical Control Lathe Operator)CNC Setup Operator (Computer Numerical Control Setup Operator)Lathe OperatorMachine OperatorNumerical Control Operator (NC Operator)Screw Machine OperatorScrew Machine Tool SetterSetup OperatorTurn OperatorAutomatic ScrewmakerAutomatic Spinning Lathe OperatorAutomatic Spinning Lathe SetterAxle TurnerBack FacerBalance RecesserBalance Wheel FacerBar PointerBar Turner

OUTLOOK · 2025–2035

What does the career outlook look like?

BLS projects a decline of 11.3% over ten years. Openings also come from people retiring or leaving, so a job can hire even when it shrinks.

Projected employment change-11.3%2025 to 2035, BLS projection
Estimated annual openings1,400Average per year, including replacing people who leave
Projected net employment change−1,900Change in the number of people in this job

Projected occupational employment

2025: 16,700 workers2035: 14,800 workers

About 84 openings a year for every 1,000 people in this job.

Typical BLS entry preparation

Education for entryHigh school diploma or equivalent
Experience in a related jobNone typically assigned
On-the-job trainingModerate-term on-the-job training

Typical entry level, not a licensing rule.

Source: Table 1.2, Occupational projections and worker characteristics, 2025–35. Projections, not guarantees.

AI risk and task exposure

Low exposure 10 out of 100. Few tasks met the study’s hypothetical AI speedup criteria.

2023 research-based estimate, not a 2026 job-loss probability. This model compares potential task speedups, not observed automation in this occupation.

U.S. average: 33Production average: 13
With a chatbot alone
7% of tasks
With AI software built on top
13% of tasks

Higher than the jobs of 14% of U.S. workers. It measures how much of the work AI could do at least twice as fast, not the odds of losing the job.

Put the exposure estimate in context

Career research identifies these important tasks for lathe operator. They have not been individually tested for automation by AvgPay; use them to investigate how the work may change:

  • Inspect sample workpieces to verify conformance with specifications, using instruments such as gauges, micrometers, and dial indicators.
  • Study blueprints, layouts or charts, and job orders for information on specifications and tooling instructions, and to determine material requirements and operational sequences.
  • Adjust machine controls and change tool settings to keep dimensions within specified tolerances.

BLS projects -11.3% employment change for this occupation over its projection period. That outlook is independent of the AI exposure score.

Explore training and career paths → · Review key skills →

NEXT MOVES

How could your career develop from here?

How people get in, what to build and where the work can lead. Pay differences compare typical pay in each job, not a promised raise.

01

Get into the field

Understand the preparation employers commonly expect before choosing a program or making a move.

Typical education
High school diploma or equivalent
Related experience
None
On-the-job training
Moderate-term on-the-job training
See education and technology details →
02

Build the right experience

Focus on the work this occupation actually involves, and investigate transferable skills.

  • Inspect sample workpieces to verify conformance with specifications, using instruments such as gauges, micrometers, and dial indicators.
  • Study blueprints, layouts or charts, and job orders for information on specifications and tooling instructions, and to determine material requirements and operational sequences.
  • Adjust machine controls and change tool settings to keep dimensions within specified tolerances.
03

Explore the next move

Compare adjacent occupations, their pay, preparation differences and knowledge areas that may need strengthening.

6covered careers to investigate
See possible directions →

Possible moves from lathe operator

These are career exploration options, not verified promotions. A higher salary is the median for a different group of workers—not a raise you will necessarily receive.

Related occupation

Milling Machine Operator →

Closely related work

National median$52,800
Difference in medians+$2,180

Preparation: Similar broad preparation level

Shared requirements: Mechanical, Production and Processing

Example of work in this direction

Remove workpieces from machines, and check to ensure that they conform to specifications, using measuring instruments such as microscopes, gauges, calipers, and micrometers.

Related occupation

Grinding Machine Operator →

Closely related work

National median$46,550
Difference in medians-$4,070

Preparation: Similar broad preparation level

Shared requirements: Production and Processing, Mechanical

Example of work in this direction

Inspect or measure finished workpieces to determine conformance to specifications, using measuring instruments, such as gauges or micrometers.

Related occupation

Machine Operator →

Closely related work

National median$47,180
Difference in medians-$3,440

Preparation: Similar broad preparation level

Shared requirements: Production and Processing, Mechanical

Example of work in this direction

Inspect workpieces for defects, and measure workpieces to determine accuracy of machine operation, using rules, templates, or other measuring instruments.

Related occupation

Woodworking Machine Operator →

Closely related work

National median$43,380
Difference in medians-$7,240

Preparation: Similar broad preparation level

Shared requirements: Mechanical, Production and Processing

Example of work in this direction

Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.

Related occupation

Press Operator →

Closely related work

National median$46,330
Difference in medians-$4,290

Preparation: Similar broad preparation level

Shared requirements: Production and Processing, Mechanical

Example of work in this direction

Measure completed workpieces to verify conformance to specifications, using micrometers, gauges, calipers, templates, or rulers.

AvgPay combines related-occupation evidence, published job requirements and cross-sectional wage statistics. Career stages are a planning framework, not a measured sequence of promotions; relationships based only on shared knowledge are explicitly labeled. Roles that require professional licensing may need additional qualifications. See how paths are constructed.

CONNECTED CAREER INTELLIGENCE

Where could your skills connect?

Career relationships work differently from salary comparisons. We separate documented occupation relationships from AvgPay's computed skill and knowledge matches, and show why each connection appears.

Documented related occupations

Source-published occupational relationships; not measured career moves

  • Milling Machine Operator →Published relationship

    These occupations have a documented research relationship. This is not evidence of a common career transition.

    Shared: Mechanical · Production and Processing · Operations Monitoring

    Different occupational emphasis: Public Safety and Security, Active Learning. This is not an assessment of your skills.

  • Grinding Machine Operator →Published relationship

    These occupations have a documented research relationship. This is not evidence of a common career transition.

    Shared: Production and Processing · Mechanical · Operations Monitoring

    Different occupational emphasis: Social Perceptiveness. This is not an assessment of your skills.

  • Machine Operator →Published relationship

    These occupations have a documented research relationship. This is not evidence of a common career transition.

    Shared: Production and Processing · Mechanical · Operations Monitoring

    Different occupational emphasis: Repairing, Social Perceptiveness. This is not an assessment of your skills.

Comparable skill profiles

AvgPay-calculated overlap of published skill and knowledge ratings; modeled, not observed

  • Engraver →AvgPay similarity

    77% weighted overlap of published skills and knowledge; not a transfer probability.

    Shared: Production and Processing · Customer and Personal Service · Operations Monitoring

    Different occupational emphasis: Social Perceptiveness. This is not an assessment of your skills.

  • 75% weighted overlap of published skills and knowledge; not a transfer probability.

    Shared: Production and Processing · Mechanical · Operations Monitoring

    Different occupational emphasis: Public Safety and Security, Social Perceptiveness. This is not an assessment of your skills.

  • Engine Assembler →AvgPay similarity

    72% weighted overlap of published skills and knowledge; not a transfer probability.

    Shared: Mechanical · Production and Processing · Operations Monitoring

    Different occupational emphasis: Public Safety and Security, Repairing. This is not an assessment of your skills.

Different occupation names may share one government wage category; none of these comparisons demonstrates licensing eligibility, employer demand or a guaranteed progression. Read the matching rules →

Explore the connected career network →

These are occupations in the same broad career field, not promised promotions or verified career transitions. Compare duties, required credentials and job demand before deciding where to go next.

Deeper research — expandedSkills, training, pay distribution and inflation, using the evidence available for this occupation

Beyond the salary headline

Explore occupational requirements, knowledge advantages and the implications of the published pay range. When detailed projections or salary trends are unavailable, we make that clear instead of inventing them.

Knowledge advantages → · Education and tools → · Purchasing power → · Research methods →

Understanding your salary options

The national median of $50,620 reflects wages for the full official BLS occupation category. It does not separate experience, specialty, certifications, shift patterns, local living costs or benefits.

Published 90th-percentile wages are 38% above the median. Use the pay percentile tool to compare a real salary with the published distribution rather than assuming an advertised salary fits a typical worker.

We currently have 105 wage-covered occupations within production, and 825 national occupations overall. Compare the field →

WHAT SETS IT APART

What makes this job different?

Knowledge this career emphasizes more than other occupations with comparable published ratings—an AvgPay calculation.

This jobTypical profiled career
Production and Processing →+1.27 points above the typical profiled career
Engineering and Technology →+0.95 points above the typical profiled career
Mechanical →+0.59 points above the typical profiled career
Personnel and Human Resources →+0.55 points above the typical profiled career
Education and Training →+0.40 points above the typical profiled career

Abilities rated important for this occupation

Arm-Hand Steadiness3.8 of 5
Control Precision3.8 of 5
Near Vision3.5 of 5
Finger Dexterity3.3 of 5
Manual Dexterity3.1 of 5
Multilimb Coordination3.1 of 5
Oral Comprehension3.1 of 5
Problem Sensitivity3.1 of 5

These are published occupation-level ratings, not a personal aptitude test or hiring screen.

Broader activities this job emphasizes

Monitoring Processes, Materials, or Surroundings4.3 of 5
Inspecting Equipment, Structures, or Materials4.1 of 5
Evaluating Information to Determine Compliance with Standards4.1 of 5
Controlling Machines and Processes4.1 of 5
Making Decisions and Solving Problems4.0 of 5
Working with Computers4.0 of 5
Repairing and Maintaining Mechanical Equipment3.9 of 5

Ratings run from 1 to 5, reflecting importance rather than time spent or personal proficiency.

EDUCATION, TRAINING & TECHNOLOGY

How do people prepare for this work?

Typical preparationSome preparation

Preparation level 2 of 5

A broad guide to the education and experience most people have. It is not a license requirement.

Education reported for the occupation

High School Diploma or the equivalent (such as a GED)32%
Some College Courses29%
Less than a High School Diploma18%
Post-Secondary Certificate12%
First Professional Degree - awarded for completion of a program that: requires at least 2 years of college work before entrance into the program, includes a total of at least 6 academic years of work to complete, and provides all remaining academic requirements to begin practice in a profession.10%

Technology and software examples

Autodesk HSMWorksComputer numerical control CNC editor softwareG-codeInventory tracking softwareM-code

What does inflation mean for this paycheck?

Use the published annual CPI observations to compare purchasing power over time. This calculator is not a historical wage trend for this occupation.

Pay needed in 2025 to break even$53,484
Prices rose5.7%
Purchasing power lost if pay stayed flat$2,711

AvgPay purchasing-power calculator using annual U.S. CPI averages. The starting pay is an editable example, not a historical salary observation for Lathe Operator. This does not account for regional prices or taxes.

Next steps

Sources, definitions and methodology

AvgPay calculates original salary and career comparisons from licensed and publicly available occupational records. See our source inventory, formulas, data limitations and release dates.

Wages: Bureau of Labor Statistics Occupational Employment and Wage Statistics, May 2025. Published wage estimates describe the full statistical occupation, not an individual offer, job seniority or narrow specialty. Occupational projections, when available, are separate estimates.

Duties, skills and occupation links: This page includes information from the O*NET® 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under CC BY 4.0. AvgPay has modified and combined some of this information with other source data and our own calculations. O*NET® is a USDOL/ETA trademark. USDOL/ETA has not approved, endorsed or tested these modifications.

Regional buying power: relative price levels are from the Bureau of Economic Analysis regional price parities; wage and price years are shown alongside each comparison. Future wages and ranges are AvgPay model outputs, separate from observed statistics. Working-condition ratings are from the same licensed O*NET database described above.

Career similarity is a research comparison, not an observed transition. AI task exposure comes from historical research rather than a live layoff or automation dataset.