National salary · May 2025

Calibration Technician salary

Typical U.S. pay is $67,820 a year, about $33 an hour.

Most workers (the middle 80%) earn between $46,680 and $106,550.

Above most U.S. jobs Pays more than jobs held by 67% of U.S. workers.

At a glance

Typical annual pay
$67,820
Full pay range ↓
People in this occupation
16,540
Compare careers ↓
Projected 10-year growth
+4.8%
Explore outlook ↓
AI task exposure
Moderate · 33/100
See limitations ↓

Pay range

10%
$46,680
25%
$56,380
Median
$67,820
75%
$92,080
90%
$106,550
Percent of workers earning less. The darker band is the middle half of workers (25th to 75th percentile).
People in this job
16,540
Career field
Architecture and engineering
Official category
Calibration Technologists and Technicians SOC 17-3028

AVGPAY FORWARD VIEW

What could calibration technician pay in the future?

Latest observed U.S. median: $67,800 in May 2025. This estimates an occupation's published median wage, independently of an individual's promotions, experience or future earnings.

Years after the latest observed wage
2026 · Experimental national forecast$69,600

Plausible range: $66,700–$72,600

AvgPay estimates this occupation could pay approximately $69,600 in 2026 nationally.

Nominal change
2.6%
In 2025 purchasing power
$67,800
Inflation-adjusted change
0.0%

The inflation-persistence baseline performed best in development testing. We carry the latest completed annual inflation rate forward.

The model starts at the wage reference year, so one year ahead may be a nowcast of a period awaiting publication. Salary data arrive with a reporting lag. Future buying power assumes 2.63% annual inflation; this assumption is not an inflation forecast.

Explore different growth assumptions

Editing the assumption turns the result into a scenario and removes the calibrated forecast range.

How well did the forecast perform?

Development and range calibration used the release for 2024; the next release, 2025, was held out. Across 808 occupations, mean absolute percentage error was 2.68% and the intended 80% range contained 81.2% of outcomes. Each occupation counts equally.

These are pooled results from one held-out calendar release, not an accuracy claim for this particular career. Estimates share overlapping survey samples. More validation years are needed; the range is not a guarantee.

Full model, baselines and validation →

From 2022 to 2025, the published national median changed by -0.6% after inflation. This compares published estimates, not individual raises; the survey uses overlapping three-year panels.

Job demand: a separate, published projection

The Bureau of Labor Statistics projects growth of 4.8% for 2025–2035. Employment growth is shown for context and does not mechanically increase the wage estimate.

2025 employment
17,000
2035 projected positions
17,800
Typical annual openings
1,500

Openings include replacement needs; they are not current vacancies or net job growth.

Values are rounded to the nearest $100. Forecasts, scenarios and observed wages remain separate. Methods, source dates and uncertainty.

LIFE ON THE JOB

Does the working environment fit you?

Pay is one part of the choice. These occupational survey ratings describe how people typically work. Employers, settings and specialties can differ.

Contact With Others

3.9 of 5
1 · No contact with others5 · Constant contact with others

Updated 08/2026 · 15 survey responses

Freedom to Make Decisions

3.8 of 5
1 · No freedom5 · A lot of freedom

Updated 08/2026 · 15 survey responses

Indoors, Environmentally Controlled

4.9 of 5
1 · Never5 · Every day

Updated 08/2026 · 15 survey responses

Physical Proximity

2.9 of 5
1 · I don't work near other people (beyond 100 ft.)5 · Very close (near touching)

Updated 08/2026 · 15 survey responses

Public Speaking

2.7 of 5
1 · Never5 · Every day

Updated 08/2026 · 15 survey responses

Spend Time Sitting

3.3 of 5
1 · Never5 · Continually or almost continually

Updated 08/2026 · 15 survey responses

Spend Time Standing

3.0 of 5
1 · Never5 · Continually or almost continually

Updated 08/2026 · 15 survey responses

Time Pressure

3.9 of 5
1 · Never5 · Every day

Updated 08/2026 · 15 survey responses

These are mean ratings, not percentages or a personal fit score. Each question has its own response labels; suppressed results are omitted. Use the ratings to prepare questions about a specific role.

Compare career directions → · Methods and definitions →

The bigger picture for calibration technician

Pay is the starting point. These findings connect the salary with the actual work, career options, and what we can—and cannot—tell from the evidence.

01 / THE PAY QUESTION

Is the pay competitive in its field?

The national median is $67,820, ranking this occupation #30 of 36 within architecture and engineering. That's 33% below AvgPay's employment-weighted benchmark of occupational medians.

The published middle-half range is $56,380–$92,080 (63% from its lower to upper end). Those are wages of different workers, not raises over time.

Understand the pay comparison →
02 / THE CAREER QUESTION

What would you actually build skills in?

Published occupational research identifies 14 task statements for this work.

Explore the work and skills →
03 / THE NEXT-MOVE QUESTION

What are the opportunities and tradeoffs?

For 2025–2035, published projections show +4.8% employment change and around 1,500 annual openings including replacements. These are national projections, not current vacancies.

Mechanical Drafter pays a higher $71,550 median within the same broad field. Qualifications may differ; this is not a promotion route.

Examine related roles and transferable skills →

AI and change: Moderate modeled task exposure (33/100), from 2023 research. It is not the probability of losing this job. Understand the model →

How to use this: Compare actual requirements, check wages in your location where available, and use the research below to evaluate tradeoffs. How AvgPay reaches its conclusions →

ORIGINAL AVGPAY RESEARCH

AvgPay Pay Position

Published wages answer what the job pays. These comparisons help explain where that pay sits among other careers and how much individual salaries differ.

Pay rank in this field#30 of 36

Ranks published occupation medians within architecture and engineering, not employees or vacancies.

Versus field pay benchmark−33%

This occupation's $67,820 median is 33% lower than the $100,796 employment-weighted index of occupation medians in its field.

Published wage spread128%

The 90th-percentile wage is 128% above the 10th-percentile wage across different workers.

What the numbers mean

Calibration Technician is #30 out of 36 in its occupational field by national median pay. Its median falls below the field benchmark; individual earnings also depend on location, experience and responsibilities. These comparisons can narrow your research, but do not predict your personal pay.

The difference between the published 10th and 90th percentiles ranks #25 out of 36 field occupations with complete wage data by relative range width. A wide range can signal varied wages across workers; it does not establish a promotion ladder, cause or salary trajectory.

What pays more in the same field?

These verified occupation medians are higher. They are options to investigate, not guaranteed next steps; qualifications and duties may differ substantially.

See all architecture and engineering careers → · Compare career tradeoffs →

AvgPay's calculations use published occupation medians and employment, not a separate employer wage survey. Comparisons use occupations rather than individual salaries, and are not adjusted for differences in credentials, city or hours. How we calculate our research.

THE WORK

What does this job actually involve?

Execute or adapt procedures and techniques for calibrating measurement devices, by applying knowledge of measurement science, mathematics, physics, chemistry, and electronics, sometimes under the direction of engineering staff. Determine measurement standard suitability for calibrating measurement devices. May perform preventive maintenance on equipment. May perform corrective actions to address identified calibration problems.

What you would spend your time doing

  1. Analyze test data to identify defects or determine calibration requirements.
  2. Attend conferences, workshops, or other training sessions to learn about new tools or methods.
  3. Calibrate devices by comparing measurements of pressure, temperature, humidity, or other environmental conditions to known standards.
  4. Conduct calibration tests to determine performance or reliability of mechanical, structural, or electromechanical equipment.
  5. Develop new calibration methods or techniques based on measurement science, analyses, or calibration requirements.
Show 9 more tasks
  1. Disassemble and reassemble equipment for inspection.
  2. Maintain or repair measurement devices or equipment used for calibration testing.
  3. Order replacement parts for malfunctioning equipment.
  4. Plan sequences of calibration tests according to equipment specifications and scientific principles.
  5. Read blueprints, schematics, diagrams, or technical orders.
  6. Verify part dimensions or clearances using precision measuring instruments to ensure conformance to specifications.
  7. Visually inspect equipment to detect surface defects.
  8. Write and submit reports about the results of calibration tests.
  9. Draw plans for developing jigs, fixtures, instruments, or other devices.

Skills that matter most

Comparable importance ratings are not available for this occupation.

These published occupational ratings describe relative skill importance on a 1–5 scale.

Other names for this job (17)
Calibration SpecialistCalibration Technician (Calibration Tech)Gauge SpecialistInstrument and Control Technician (I and C Tech)Instrument Control Technician (Instrument Control Tech)Quality Technician (Quality Tech)Calibration TechnologistCertified Calibration Technician (Certified Calibration Tech)Electromechanical Equipment TesterElectronic Instrument Testing Technician (Electronic Instrument Testing Tech)Electronics Calibration TechnicianHydrometer CalibratorInstrument TechnicianInstrumentation TechnicianMetrology Calibration Technician (Metrology Calibration Tech)Scale Technician (Scale Tech)Test Technician (Test Tech)

OUTLOOK · 2025–2035

What does the career outlook look like?

BLS projects growth of 4.8% over ten years. Openings also come from people retiring or leaving, so a job can hire even when it shrinks.

Projected employment change+4.8%2025 to 2035, BLS projection
Estimated annual openings1,500Average per year, including replacing people who leave
Projected net employment change+800Change in the number of people in this job

Projected occupational employment

2025: 17,000 workers2035: 17,800 workers

About 88 openings a year for every 1,000 people in this job.

Typical BLS entry preparation

Education for entryAssociate's degree
Experience in a related jobNone typically assigned
On-the-job trainingNone typically assigned

Typical entry level, not a licensing rule.

Source: Table 1.2, Occupational projections and worker characteristics, 2025–35. Projections, not guarantees.

AI risk and task exposure

Moderate exposure 33 out of 100. Some tasks met the study’s criteria. Actual workplace change may differ.

2023 research-based estimate, not a 2026 job-loss probability. This model compares potential task speedups, not observed automation in this occupation.

U.S. average: 33Engineering average: 48
With a chatbot alone
13% of tasks
With AI software built on top
53% of tasks

Higher than the jobs of 50% of U.S. workers. It measures how much of the work AI could do at least twice as fast, not the odds of losing the job.

Put the exposure estimate in context

Career research identifies these important tasks for calibration technician. They have not been individually tested for automation by AvgPay; use them to investigate how the work may change:

  • Analyze test data to identify defects or determine calibration requirements.
  • Attend conferences, workshops, or other training sessions to learn about new tools or methods.
  • Calibrate devices by comparing measurements of pressure, temperature, humidity, or other environmental conditions to known standards.

BLS projects +4.8% employment change for this occupation over its projection period. That outlook is independent of the AI exposure score.

Explore training and career paths → · Review key skills →

NEXT MOVES

How could your career develop from here?

How people get in, what to build and where the work can lead. Pay differences compare typical pay in each job, not a promised raise.

01

Get into the field

Understand the preparation employers commonly expect before choosing a program or making a move.

Typical education
Associate's degree
Related experience
None
On-the-job training
None
See education and technology details →
02

Build the right experience

Focus on the work this occupation actually involves, and investigate transferable skills.

  • Analyze test data to identify defects or determine calibration requirements.
  • Attend conferences, workshops, or other training sessions to learn about new tools or methods.
  • Calibrate devices by comparing measurements of pressure, temperature, humidity, or other environmental conditions to known standards.

Comparable published skill ratings are not available for this occupation. Use the documented tasks above instead of a made-up skills list.

03

Explore the next move

Compare adjacent occupations, their pay, preparation differences and knowledge areas that may need strengthening.

6covered careers to investigate
See possible directions →

Possible moves from calibration technician

These are career exploration options, not verified promotions. A higher salary is the median for a different group of workers—not a raise you will necessarily receive.

Related occupation

Aerospace Technician →

Closely related work

National median$82,890
Difference in medians+$15,070

Preparation: Similar broad preparation level

Example of work in this direction

Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.

Related occupation

Mechanical Engineering Technician →

Closely related work

National median$74,510
Difference in medians+$6,690

Preparation: Similar broad preparation level

Example of work in this direction

Draft detail drawing or sketch for drafting room completion or to request parts fabrication by machine, sheet or wood shops.

Related occupation

Industrial Electronics Repairer →

Closely related work

National median$74,090
Difference in medians+$6,270

Preparation: Similar broad preparation level

Example of work in this direction

Perform scheduled preventive maintenance tasks, such as checking, cleaning, or repairing equipment, to detect and prevent problems.

Related occupation

Mechatronics Technician →

Closely related work

National median$73,900
Difference in medians+$6,080

Preparation: Similar broad preparation level

Example of work in this direction

Test performance of electromechanical assemblies, using test instruments such as oscilloscopes, electronic voltmeters, or bridges.

Related occupation

Quality Inspector →

Closely related work

National median$48,570
Difference in medians-$19,250

Preparation: Lower typical preparation level

Example of work in this direction

Discard or reject products, materials, or equipment not meeting specifications.

Additional related roles we haven't fully profiled (2)

These directions may be worth researching, but AvgPay will not guess at their salary, credentials or probability of transition.

AvgPay combines related-occupation evidence, published job requirements and cross-sectional wage statistics. Career stages are a planning framework, not a measured sequence of promotions; relationships based only on shared knowledge are explicitly labeled. Roles that require professional licensing may need additional qualifications. See how paths are constructed.

CONNECTED CAREER INTELLIGENCE

Where could your skills connect?

Career relationships work differently from salary comparisons. We separate documented occupation relationships from AvgPay's computed skill and knowledge matches, and show why each connection appears.

Documented related occupations

Source-published occupational relationships; not measured career moves

  • Aerospace Technician →Published relationship

    These occupations have a documented research relationship. This is not evidence of a common career transition.

    Different occupational emphasis: Mechanical, Engineering and Technology. This is not an assessment of your skills.

  • These occupations have a documented research relationship. This is not evidence of a common career transition.

    Different occupational emphasis: Engineering and Technology, Computers and Electronics. This is not an assessment of your skills.

  • These occupations have a documented research relationship. This is not evidence of a common career transition.

    Different occupational emphasis: Engineering and Technology, Mechanical. This is not an assessment of your skills.

Different occupation names may share one government wage category; none of these comparisons demonstrates licensing eligibility, employer demand or a guaranteed progression. Read the matching rules →

Explore the connected career network →

These are occupations in the same broad career field, not promised promotions or verified career transitions. Compare duties, required credentials and job demand before deciding where to go next.

Deeper research — expandedSkills, training, pay distribution and inflation, using the evidence available for this occupation

Beyond the salary headline

Explore occupational requirements, knowledge advantages and the implications of the published pay range. When detailed projections or salary trends are unavailable, we make that clear instead of inventing them.

Knowledge advantages → · Education and tools → · Purchasing power → · Research methods →

Understanding your salary options

The national median of $67,820 reflects wages for the full official BLS occupation category. It does not separate experience, specialty, certifications, shift patterns, local living costs or benefits.

Published 90th-percentile wages are 57% above the median. Use the pay percentile tool to compare a real salary with the published distribution rather than assuming an advertised salary fits a typical worker.

We currently have 36 wage-covered occupations within architecture and engineering, and 825 national occupations overall. Compare the field →

WHAT SETS IT APART

What makes this job different?

Knowledge this career emphasizes more than other occupations with comparable published ratings—an AvgPay calculation.

The published ratings don't show a clear standout for this job, so we list the documented requirements instead.

Most important knowledge areas

Comparable importance ratings are not available for this occupation.

Most important skills

Comparable importance ratings are not available for this occupation.

Broader activities this job emphasizes

Documenting/Recording Information4.5 of 5
Processing Information4.2 of 5
Evaluating Information to Determine Compliance with Standards4.1 of 5
Getting Information4.1 of 5
Communicating with Supervisors, Peers, or Subordinates4.1 of 5
Identifying Objects, Actions, and Events4.0 of 5
Drafting, Laying Out, and Specifying Technical Devices, Parts, and Equipment3.9 of 5

Ratings run from 1 to 5, reflecting importance rather than time spent or personal proficiency.

EDUCATION, TRAINING & TECHNOLOGY

How do people prepare for this work?

Typical preparationMedium preparation

Preparation level 3 of 5

A broad guide to the education and experience most people have. It is not a license requirement.

Education reported for the occupation

Comparable education responses are not available for this occupation.

Technology and software examples

Microsoft ExcelMicrosoft Office softwareMicrosoft OutlookMicrosoft WordThe MathWorks MATLABMathWorks SimulinkApple macOSAutodesk AutoCADAutodesk AutoCAD Civil 3DBentley MicroStationDassault Systemes SolidWorksLinuxMicrosoft PowerPointMicrosoft Project

What does inflation mean for this paycheck?

Use the published annual CPI observations to compare purchasing power over time. This calculator is not a historical wage trend for this occupation.

Pay needed in 2025 to break even$71,657
Prices rose5.7%
Purchasing power lost if pay stayed flat$3,632

AvgPay purchasing-power calculator using annual U.S. CPI averages. The starting pay is an editable example, not a historical salary observation for Calibration Technician. This does not account for regional prices or taxes.

Next steps

Sources, definitions and methodology

AvgPay calculates original salary and career comparisons from licensed and publicly available occupational records. See our source inventory, formulas, data limitations and release dates.

Wages: Bureau of Labor Statistics Occupational Employment and Wage Statistics, May 2025. Published wage estimates describe the full statistical occupation, not an individual offer, job seniority or narrow specialty. Occupational projections, when available, are separate estimates.

Duties, skills and occupation links: This page includes information from the O*NET® 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under CC BY 4.0. AvgPay has modified and combined some of this information with other source data and our own calculations. O*NET® is a USDOL/ETA trademark. USDOL/ETA has not approved, endorsed or tested these modifications.

Regional buying power: relative price levels are from the Bureau of Economic Analysis regional price parities; wage and price years are shown alongside each comparison. Future wages and ranges are AvgPay model outputs, separate from observed statistics. Working-condition ratings are from the same licensed O*NET database described above.

Career similarity is a research comparison, not an observed transition. AI task exposure comes from historical research rather than a live layoff or automation dataset.